| Item |
Description |
Estimate |
|
Blocks |
| 1 |
1-2-3 and 2-4-6 Blocks |
$25 |
| 2 |
Angle Blocks
(30-60-90 and 45-45-90) |
$25 |
| 3 |
Riser Blocks /
Knees |
$25 |
| 4 |
Sine Bars /
Plates |
$25 |
| 5 |
V-Blocks |
$25 |
| Bore/Hole Gages |
| 1 |
Bore Gage |
$20 |
| 2 |
Hole Gage |
$20 |
|
Calipers |
| 1 |
Slide Caliper 12" and under
(electronic, digital or dial) |
$18 |
| 2 |
Slide Caliper 13" through
24"
(electronic, digital or dial) |
$20 |
| 3 |
Slide Caliper 25" through
50"
(electronic, digital or dial) |
$25 |
| 4 |
Slide Caliper 50" and over
(electronic, digital or dial) |
$40 |
|
Gage Blocks |
| 1 |
Gage Block Set (min. 9 pc
set) |
$2.75 each |
| 2 |
Single Gage Block |
$20 each |
| Gages (Other) |
| 1 |
Angle Gage Set |
$28 |
| 2 |
Feeler Gage Set |
$28 |
| 3 |
Inspection Gage (custom -
angles, lengths, etc.) |
Call for pricing |
| 4 |
Radius Gage Set |
$28 |
| 5 |
Thickness Gage |
$20 |
| 6 |
Wire Gage (i.e. 0-36) |
$60 |
| Hardness Tester |
| 1 |
Hardness Tester |
Call for pricing |
|
Height Gages |
| 1 |
Height Gage to 12"
(electronic, digital or vernier) |
$20 |
| 2 |
Height Gage 12" to 24"
(electronic, digital or vernier) |
$25 |
|
Indicators |
| 1 |
Dial Indicator |
$18 |
| 2 |
Drop Indicator
(dial or electronic) |
$18 |
| 3 |
Test Indicator |
$18 |
| Length Standards |
| 1 |
Length Standard |
$18 |
| 2 |
Pi Tape |
$25 |
| 3 |
Steel Rules |
$25+ |
| 4 |
Tape Measure (up
to 33 ft) |
$25 |
| Levels |
| 1 |
General |
$40 |
| 2 |
Sight Level (with
and without Angle) |
$55-85 |
| Measuring Wires |
| 1 |
Set of Three |
$15 |
|
Micrometers |
| 1 |
Depth Micrometer
(electronic digital, mechanical digital regular readout) prices are $20.00
for the head and $6.00 for each additional rod |
$18 +
$6 per rod
|
| 2 |
Inside
Micrometer fixed range 2-12" |
$26 |
| 3 |
Inside
Micrometer 2 and 3 point |
Call for pricing |
| 4 |
Intramic (plus
$10 with Setting Ring) |
$33 |
| 5 |
Outside Micrometer
(non-interchangeable anvils) |
$18 |
| 6 |
Micrometer Rods and Standards
(with set) |
$6 |
|
Optical Comparators |
| 1 |
Optical Comparator |
$125 |
|
Parallels |
| 1 |
Parallel (solid or
adjustable) max. length 40" |
$20-$60 |
|
Pin Gages |
| 1 |
Pin Gage (plus and minus
series) price is based upon per pin in a set of 40 or more pieces |
$0.70 each |
|
Plug Gages |
| 1 |
Plain Plug (up to 12.0000") |
$20 |
| 2 |
Thread Plug (based on
size, class & quantity) |
$20+ |
|
3 |
GO/NG Plug |
$26 |
|
Protractors |
| 1 |
General |
$20 |
|
Ring Gages |
| 1 |
Plain Ring (up to 6.0000") |
$20 |
| 2 |
Thread Ring (based on
size, class & quantity) |
$20+ |
|
3 |
GO/NG Ring |
$26 |
|
Squares |
| 1 |
Square (solid test or true
squares) |
$25-$425 |
|
Snap Gage |
| 1 |
Snap Gage |
$18 |
|
Taper Gage |
| 1 |
ISO 594 / Luer Taper Gages
(female and male) |
$65-95 |
|
Repair/Evaluation |
| 1 |
Mechanical Equipment - repair
evaluation fee (will be applied towards the cost of the repair, if
accepted). |
$45 per item |
![[Company Logo Image]](images/logonew.jpg)
